Zanussi FE 4000 Інструкція із застосування та догляду - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція із застосування та догляду для Пральна машина Zanussi FE 4000. Zanussi FE 4000 36 сторінок. Front-load washing machine
Також для Zanussi FE 4000: Інструкція з використання та догляду (36 сторінок)

Друкувати сторінку

Installation

Unpacking

Having removed the outer carton,

reinforcing angles, and polythene

wrapping, you must take out the internal

packing which protected the appliance's

«works» during transit.

Using the plastic spanner provided,

remove the three large bolts from the

back of the machine to free the washing

drum (figure 1).

Each bolt leaves behind a plastic spacer

inside the machine, this should be

worked loose bv inserting a screwdriver

into the bolt hole, allowing the spacers to

drop to the bottom of the machine.

Lay the machine carefully on its back to

reveal two pieces of polythene bands in

the base (figure 2).

First pull band A, on left hand side then

pull band B on the right hand side to

withdraw the remaining internal packing,

taking care not to catch and damage any

of the appliance's internal components in

the process.

Finally, lift the appliance of the

polystyrene base packing and remove the

plastic spacers you worked loose earlier.

These spacers, together with the three

large bolts and other internal packing

should be kept in a safe place so they

can be used if the machine has to be

transported again.