Zanussi FJ 1296 Інструкція з експлуатації - Сторінка 14

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Пральна машина Zanussi FJ 1296. Zanussi FJ 1296 19 сторінок. Zanussi washing machine instruction booklet fj 1296

Друкувати сторінку

1. Control Panel

WASHING 2 KG OF SYNTHETIC FABRICS AT 40°C

Suppose you have 2 kg of synthetic fabric laundry to

wash. They are rather delicate fabrics and should not be

washed at a high temperature.

1 Load the laundry

P0004

2 Measure out the detergent

P0260

Pull out the detergent dispenser drawer from the control

panel. Measure out the amount of detergent required

and pour into the main wash compartment.

3 Add the fabric softener if required

P0226

4 Depress the RINSE HOLD button if re-

quired.

5 Select the required spin speed

Open the door by pulling

the catch outward.

Load the items one at a

time and close the door.

P0223

Pour the fabric softener, if

required, into the compart-

ment marked

Do not exceed the MAX

level and then close the

drawer gently.

6 Select the required wash programme

P0527

7 Start the machine

Before starting up the machine check that:

the appliance is plugged in

the water supply taps are turned on

the drain hose is correctly and securely positioned

the door and the detergent dispenser drawer are

closed.

P0414

8 At the end of the programme

The machine stops automatically.

If you have depressed the rinse hold button, the ma-

chine will stop with the water left in the tub, to prevent

the fabric from creasing. To drain the water release the

same button (the clothes will be gently spun) or select

programme P.

The door is controlled by a safety device which releases

2 minutes after the end of the programme. The door

locked light will go out.

Switch the machine off by depressing the ON/OFF but-

ton again. The mains-on light will go out.

When the programme has finished you are advised to

unplug the appliance and turn off the water taps.

Turn the programme

selector dial clockwise to

the required programme.

Depress the ON/OFF but-

ton: the mains-on light and

door locked light will illumi-

nate and the machine

starts operating.