Zanussi FJE 904 Інструкція з експлуатації - Сторінка 21

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Пральна машина Zanussi FJE 904. Zanussi FJE 904 23 сторінки. Washing machine fje 904 - fje 1204g

Друкувати сторінку

1. Something Not Working

132992150•FJE904•gb.qxd

02/04/03

Something not working?

Problems which you can resolve yourself.

During machine operation it is possible that one of the following alarm codes appears on the display:

- E10: problem with the water supply

- E20: problem with water draining

- E40: door open

Once the problem has been eliminated, press the START/PAUSE button

all checks, the problem persists, contact your local Service Centre.

Problem

• The machine does not start up:

• The machine does not fill:

• The machine fills then empties

immediately:

• The machine does not empty

and/or does not spin:

• There is water on the floor:

• Unsatisfactory washing results:

• The machine vibrates or is

noisy:

12:27

Pagina 21

(Nero/Process Black pellicola)

• The door is not firmly closed. (E40)

• The machine is not plugged in or there is no power

• The main fuse has blown.

• The START/PAUSE button has not been

• The DELAY START option has been selected.

• The water tap is closed. (E10)

• The inlet hose is squashed or kinked. (E10)

• The filter in the inlet hose is blocked. (E10)

• The door is not properly closed. (E40)

• The end of the drain hose is too low. Refer to

• The drain hose is squashed or kinked. (E20)

• The RINSE HOLD option

• The drain pump is clogged. (E20)

• Too much detergent or unsuitable detergent

• Check whether there are any leaks from one of the

• The drain hose is damaged.

• The drain pump cover has not been screwed in

• The emergency emptying hose has not been

• Too little detergent or unsuitable detergent has

• Stubborn stains have not been treated prior to

• The correct temperature was not selected.

• Excessive laundry load.

• The transit bolts and packing have not been

• The support feet have not been adjusted.

• The laundry is not evenly distributed in the drum.

• Maybe there is very little laundry in the drum.

to restart the programme. If after

Possible cause

at the socket.

depressed.

relevant paragraph in "water drainage" section.

has been selected.

(creates too much foam) has been used.

inlet hose fittings. It is not always easy to see this

as the water runs down the hose; check to see if it

is damp.

after cleaning.

plugged after cleaning the pump.

been used.

washing.

removed.