Alead LiveMIC2 Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Мікрофон Alead LiveMIC2. Alead LiveMIC2 11 сторінок. Wireless bluetooth microphone & transmitter. for the speech recognition user

Друкувати сторінку

Dragon NaturallySpeaking

All versions of Dragon NaturallySpeaking, including the Home, Premium, Professional, Legal and Medical

versions are fully compatible with a Bluetooth sound source, including the LiveMIC2. The set-up is

straightforward and you should follow the Dragon instructions for adding a Bluetooth audio device as

your sound source.

We add a few simple instructions to assure simplicity in setting up this device:

1. If you haven't done so already, start by adding the LiveMIC2 to your computer as a sound

source. (If your computer does not have built in Bluetooth, an inexpensive Bluetooth dongle will

serve the purpose. In this case, be sure to install any needed Bluetooth drivers.) Detailed

instructions are provided earlier in this guide. Once your LiveMIC2 is paired and you have an

active connection, proceed to the next step

2. Do some preliminary gain setting of your LiveMIC2 using either the external microphone or on-

board unidirectional mic on the device (whichever you intend to use). We recommend opening

the sound control panel, identifying the LiveMIC2 on the Recording tab, and doing some talking

to confirm that the device is connected and a sound signal getting through. At this point you

should adjust the gain up or down as needed until the sound deflections on your sound control

panel is extending up about half way during ordinary speech into your microphone.

3. Open Dragon and add your Bluetooth source (the LiveMIC2) as a new source to your existing

Dragon user profile (alternatively you can set up an entirely

new user profile, but this is not necessary). Instructions for

adding a new source vary based on the version and proceed as

shown below:

Dragon 13,14 & 15:

Go to Profile > Manage Dictation Sources

2. From the "Manage Dictation Sources" window select

your new audio source

3. Click "Add New Dictation Source"

4. Follow ensuing steps

Dragon 12 (DMPE2) or Equivalent

1. Go to the Profile menu and select

"Add dictation source to the

current User Profile ..."

2. On the next screen select the

appropriate type of sound source

from the drop-down menu