Zanussi ZWS 5883 Посібник користувача - Сторінка 20

Переглянути онлайн або завантажити pdf Посібник користувача для Пральна машина Zanussi ZWS 5883. Zanussi ZWS 5883 24 сторінки. Washing machine

Друкувати сторінку

The other end of the inlet hose which connects

to the appliance can be turned as showed in the

picture.

Do not place the inlet hose downwards. Angle

the hose to the left or right depending on the

position of your water tap. Set the hose cor-

rectly by loosening the ring nut. After position-

ing the inlet hose, be sure to tighten the ring

nut again to prevent leaks.

Caution! The inlet hose must not be

lengthened. If it is too short and you do not

wish to move the tap, you will have to purchase

a new, longer hose specially designed for this type

of use.

Water drainage

The end of the drain hose can be positioned in

three ways:

Electrical connection

Information on the electrical connection is given

on the rating plate on the inner edge of the ap-

pliance door.

Check that your domestic electrical installation

can take the maximum load required, also taking

into account any other appliances in use.

Caution! Connect the machine to an

earthed socket.

Caution! The manufacturer does not accept

Environment concerns

The symbol

on the product or on its

packaging indicates that this product may not be

treated as household waste. Instead it should be

Hooked over the edge

of a sink using the plas-

tic hose guide sup-

plied with the ma-

chine.

In this case, make sure the end cannot come

unhooked when the machine is emptying. This

could be done by tying it to the tap with a piece

of string or attaching it to the wall.

In a sink drain pipe branch . This branch must be

above the trap so that the bend is at least 60

cm above the ground.

Directly into a drain pipe at a height of not less

than 60 cm and not more than 90 cm. The end

of the drain hose must always be ventilated ,

i.e. the inside diameter of the drain pipe must

be larger than the outside diameter of the drain

hose. The drain hose must not be kinked.

any responsibility for damage or injury through

failure to comply with the above safety

precaution.

Caution! The power supply cable must be

easily accessible after installing the machine.

Caution! Should the appliance power

supply cable need to be replaced, this must

be carried out by a Service Centre.

taken to the appropriate collection point for the

recycling of electrical and electronic equipment.

By ensuring this product is disposed of correctly,