Zanussi ZDT8453 Інструкція з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Посудомийна машина Zanussi ZDT8453. Zanussi ZDT8453 21 сторінка.

If you are using dishwasher detergent that already contains

rinse aid, the detergent including the rinse aid must be

placed in the detergent compartment.

In this case the rinse aid inflow must be deactivated in order

to avoid a double dosage.

Deactivation/activation of the inflow of

rinse aid

(The dishwasher must be switched off)

When the inflow of rinse aid has been deactivated, also

the rinse aid indicator light on the control panel is

automatically deactivated.

1. Press the On/Off push button. All programme selection push

buttons indicator lights will illuminate (setting mode).

If only one programme selection push button indicator light

is illuminated, this means that a washing programme has

been selected.

The programme must be cancelled: press simultaneously

the function push buttons 2 and 3 for about 2 seconds, the

indicator light of the setted programme push button starts

flashing for about 2 seconds.

After about 2 seconds the indicator lights of all the

programme selection push buttons will illuminate indicating

that the setted programme has been cancelled and that

the machine is now in setting mode.

2. Press simultaneously function push buttons 2 and 3, the

indicator lights of the function push buttons 1, 2 and 3 start

flashing.

3. Press the function push button 2, the indicator lights of

function push buttons 1 and 3 turn off while the indicator

light of the push button 2 goes on flashing, at the same time

the "end of programme" indicator light illuminates,

indicating that the inflow of rinse aid is active.

4. To deactivate the inflow of rinse aid, press again the

function push button 2, the "end of programme" indicator

light turns off, indicating that the inflow of rinse aid has been

deactivated.

5. To memorise the operation, switch off the dishwasher by

pressing the On/Off push button or wait about 60 seconds

after which the dishwasher will automatically return to

setting mode.

To activate again the inflow of rinse aid simply follow the above

operations until the "end of programme" indicator lights

illuminates.