Zanussi ZDTS102 Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Посудомийна машина Zanussi ZDTS102. Zanussi ZDTS102 20 сторінок.
Друкувати сторінку
Programme selection/cancel button
Use the programme selection/cancel button for these
operations:
• To set the washing programme. Refer to the chapter
'Setting and starting a washing programme'.
• To set the water softener. Refer to the chapter 'Set-
ting the water softener'.
• To deactivate/activate the audible signals. Refer to
the section 'Audible signals'.
• To cancel a washing programme in progress. Refer
to the chapter 'Setting and starting a washing pro-
gramme'.
Setting mode
The appliance is in setting mode when all the pro-
gramme indicator lights are off and the end indicator
light flashes.
The appliance must be in setting mode for these oper-
ations:
– To set a washing programme.
– To set the water softener level.
– To deactivate/activate the audible signals.
If a programme indicator light is on, cancel the pro-
gramme to go back to the setting mode. Refer to the
chapter "Setting and starting a washing programme".
Programme indicator lights A and B
Apart the selection of the corresponding washing pro-
gramme; these lights have an auxiliary functions:
• The adjustment of the water softener level.
Washing programmes
Washing programmes
Programme
4
• Deactivation/activation of the audible signals.
Audible signals
You can hear an audible signal:
• At the end of the washing programme.
• When the appliance has a malfunction.
The activation of the audible signals is set at the factory.
Do these steps to deactivate the audible signals:
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold the programme selection/cancel
button until programme indicator light A flashes
and programme indicator light B comes on.
4. Press the programme selection/cancel button
again.
– Programme indicator light A comes on.
– Programme indicator light B starts to flash.
5. Wait until programme indicator light A goes off.
– Programme indicator light B continues to flash.
– The end indicator light comes on.
The audible signals are activated.
6. Press the programme selection/cancel button
again.
– The end indicator light goes off.
The audible signals are deactivated.
7. Switch off the appliance to save the operation.
Do these steps to activate the audible signals:
1. Do the above procedure until the end indicator light
comes on.
Degree of
Type of
soil
load
Crockery,
Heavy soil
cutlery, pots
and pans
Programme description
Prewash
Main wash up to 70°C
2 intermediate rinses
Final rinse
Drying