Zanussi ZSF 6161 S Посібник користувача - Сторінка 21

Переглянути онлайн або завантажити pdf Посібник користувача для Посудомийна машина Zanussi ZSF 6161 S. Zanussi ZSF 6161 S 28 сторінок.

Fault code and malfunction

appears in the digital display.

The dishwasher will not drain.

appears in the digital display.

Anti-flood device is activated.

The programme does not start.

Once these checks have been carried out;

close the dishwasher's door and switch on the

appliance. Press the button of the programme

that was running before the intervention of the

alarm. The programme will continue from the

point at which it was interrupted.

If the malfunction or fault code reappears con-

tact the Service Force Centre.

For other fault codes not described in the above

chart, please contact your Service Force Cen-

tre.

Contact your local Service Force Centre, quot-

ing the model (Mod.), product number (PNC)

and serial number (S.N.).

Possible cause and solution

• The sink spigot is blocked.

Clean out the sink spigot.

• The water drain hose has not been correctly laid or

it is bent or squashed.

Check the water drain hose connection.

• Close the water tap and contact your local Service

Force Centre.

• The dishwasher's door has not been properly

closed. Close the door.

• The main plug is not plugged in. Insert the main plug.

• The fuse has blown out in the household fuse box.

Replace the fuse.

• Delay start has been set.

If dishes are to be washed immediately, cancel the

delay start.

This information can be found on the rating

plate located on the side of the dishwasher

door.

So that you always have these numbers at

hand, we recommend you to make a note of

them here:

Mod. : . . . . . . . . . . . . . . . . . . . . . . .

PNC :. . . . . . . . . . . . . . . . . . . . . . . .

S.N. : . . . . . . . . . . . . . . . . . . . . . . . .