Zanussi 949 492 416 00 Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Варильна поверхня Zanussi 949 492 416 00. Zanussi 949 492 416 00 16 сторінок.
Також для Zanussi 949 492 416 00: Посібник користувача (16 сторінок)
![Zanussi 949 492 416 00 Посібник користувача](/uploads/products/server2/7123885/7123885.jpg)
Heat setting
5
6 - 9
5.3 The heat setting
Touch
to increase the heat setting. Touch
to decrease the heat setting. Touch
and
at the same time to deactivate the
cooking zone.
5.4 Activating and deactivating the
outer rings
You can adjust the surface you cook to the
dimension of the cookware.
Use sensor field:
To activate the outer ring: touch the sensor
field. The indicator comes on.
To deactivate the outer ring: touch the
sensor field until the indicator goes out.
5.5 Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time. The
function sets the highest heat setting for
some time and then decreases to the correct
heat setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch
until the correct heat setting
comes on. After 3 seconds
To deactivate the function: touch
5.6 Timer
• Count Down Timer
You can use this function to set the length of
a single cooking session.
First set the heat setting for the cooking
zone, then set the function.
10
ENGLISH
The hob deactivates
after
4 hours
1.5 hour
comes on.
.
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
To activate the function or change the
time: touch
or
time (00 - 99 minutes). When the indicator of
the cooking zone starts to flash, the time
counts down.
To see the remaining time: touch
the cooking zone. The indicator of the
cooking zone starts to flash. The display
shows the remaining time.
To deactivate the function: touch
the cooking zone and then touch
remaining time counts down to 00. The
indicator of the cooking zone disappears.
When the countdown ends, an
acoustic signal sounds and 00
flashes. The cooking zone
deactivates.
To stop the sound: touch
• Minute Minder
You can use this function when the hob is
activated and the cooking zones do not
operate. The heat setting display shows
To activate the function: touch
touch
or
of the timer to set the time.
When the time finishes, an acoustic signal
sounds and 00 flashes.
To stop the sound: touch
To deactivate the function: touch
then touch
. The remaining time counts
down to 00.
The function has no effect on the
operation of the cooking zones.
5.7 Lock
You can lock the control panel while cooking
zones operate. It prevents an accidental
change of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays on.
of the timer to set the
to set
to set
. The
.
and then
.
and
.
.