Zanussi VH501R Інструкція по застосуванню та догляду - Сторінка 6

Переглянути онлайн або завантажити pdf Інструкція по застосуванню та догляду для Варильна поверхня Zanussi VH501R. Zanussi VH501R 19 сторінок. Zanussi hob
Також для Zanussi VH501R: Інструкція із застосування та догляду (19 сторінок), Інструкція із застосування та догляду (19 сторінок)

Installation

The hob must be installed in accordance

with the installation instructions for this

appliance. Connection to the electricity

supply must be made by a competent

electrician to a suitable double pole switch.

WARNING:

THIS APPLIANCE MUST

BE EARTHED

This appliance complies with the Radio

Interference reguirements of EEC

Directive 82/449/EEC.

Rating Plate

The rating plate is situated on the

underside of the unit and gives the model

and serial number of the appliance, which

should be guoted in any communication.

It is advisable to make a note of these in

the back ofthis book before the appliance

is installed.

Before Use

Please ensure that any protective film and

all packaging has been removed from the

appliance before switching on.

For conventional ceramic and Zanussi

Halogen Heat hobs:

Allow all the heated areas to run on a

medium setting for a few minutes. Any

smoking which occurs is guite normal and

if the odour emitted during this initial

burning off is unpleasant, it may be

necessary to open a window or door for

ventilation.

For all ceramic hobs:

When the appliance has cooled, apply a

thin coating of Cleaner Conditioner to the

ceramic glass panel. This will not only

protect the surface, but also make it easier

to clean after use (page 12).