Zanussi ZANZIFN844K Посібник користувача - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник користувача для Варильна поверхня Zanussi ZANZIFN844K. Zanussi ZANZIFN844K 21 сторінка.

Друкувати сторінку

Problem

An acoustic signal sounds and

the hob deactivates.

An acoustic signal sounds

when the hob is deactivated.

The hob deactivates.

Residual heat indicator does

not come on.

Hob²Hood does not work.

Automatic Heat Up does not

operate.

The heat setting changes be-

tween two levels.

The sensor fields become hot.

comes on.

Possible cause

You put something on one or

more sensor fields.

You put something on the sen-

sor field

The zone is not hot because it

operated only for a short time

or the sensor is damaged.

You covered the control panel.

You use a very tall pot which

blocks the signal.

The zone is hot.

The highest heat setting is set.

Power management operates.

The cookware is too large or

you put it too near to the con-

trols.

Child Safety Device or Lock

operates.

There is no cookware on the

zone.

The cookware does not cover

the cross / square.

The cookware is unsuitable.

The diameter of the bottom of

the cookware is too small for

the zone.

Remedy

Remove the object from the

sensor fields.

Remove the object from the

sensor field.

If the zone operated sufficiently

long to be hot, speak to an Au-

thorised Service Centre.

Remove the object from the

control panel.

Use a smaller pot, change the

cooking zone or operate the

hood manually.

Let the zone become suffi-

ciently cool.

The highest heat setting has

the same power as the func-

tion.

Refer to "Daily use".

Put large cookware on the rear

zones, if possible.

Refer to "Daily use".

Put cookware on the zone.

Cover the cross / square fully.

Use suitable cookware. Refer

to "Hints and tips".

Use cookware with correct di-

mensions. Refer to "Technical

data".