Zanussi ZANZIFN844K Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Варильна поверхня Zanussi ZANZIFN844K. Zanussi ZANZIFN844K 21 сторінка.

Друкувати сторінку

DAILY USE

WARNING! Refer to Safety chapters.

ACTIVATING AND DEACTIVATING

Touch

for 1 second to activate or deactivate the

hob.

AUTOMATIC SWITCH OFF

The function deactivates the hob

automatically if:

•

all cooking zones are deactivated,

•

you do not set the heat setting after you activate

the hob,

•

you spill something or put something on the

control panel for more than 10 seconds (a pan,

a cloth, etc.). An acoustic signal sounds and the

hob deactivates. Remove the object or clean the

control panel.

•

the hob gets too hot (e.g. when a saucepan

boils dry). Let the cooking zone cool down

before you use the hob again.

•

you use incorrect cookware. The symbol

comes on and the cooking zone deactivates

automatically after 2 minutes.

•

you do not deactivate a cooking zone or change

the heat setting. After some time

and the hob deactivates.

The relation between the heat setting and the

time after which the hob deactivates:

Heat setting

, 1 - 2

3 - 4

6 - 9

THE HEAT SETTING

To set or change the heat setting:

Touch the control bar at the correct heat setting or

move your finger along the control bar until you

reach the correct heat setting.

comes on

The hob deactivates

after

6 hours

5 hours

4 hours

1.5 hour

JOINZONE

The function operates when the pot

covers the centres of the two zones.

This function connects two left side cooking zones

and they operate as one.

First set the heat setting for one of the left side

cooking zones.

To activate the function: touch

change the heat setting touch one of the control

sensors.

To deactivate the function: touch

cooking zones operate independently.

When you use only one cooking zone of the pair we

recommend that you use the rear cooking zone.

Also when you use large cookware we recommend

that you put it near to the rear cooking zone.

AUTOMATIC HEAT UP

Activate this function to get a desired heat setting

in a shorter time. When it is on, the zone operates

on the highest setting in the beginning and then

continues to cook at the desired heating setting.

To activate the function the cooking

zone must be cold.

To activate the function for a cooking zone:

touch

(

comes on). Immediately touch a

desired heat setting. After 3 seconds

To deactivate the function: change the heat

setting.

POWERBOOST

This function makes more power available to the

induction cooking zones. The function can be

activated for the induction cooking zone only for a

limited period of time. After this time the induction

cooking zone automatically sets back to the highest

heat setting.

Refer to "Technical data" chapter.

. To set or

. The

comes on.