Zanussi ZGF 326 Інструкція з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Варильна поверхня Zanussi ZGF 326. Zanussi ZGF 326 9 сторінок.

4. Instruction for the Installer

The following instructions about installation and

maintenance must be carried out by qualified

personnel in compliance with the regulation in

force.

The side walls of the unit in which the hob is

going to be installed, must not exceed the height

of the working top.

Avoid installing the appliance in the proximity of

inflammable materials (e.g. curtains, tea towels

etc.).

The appliance must be electrically disconnected

before all interventions. If any electric supply to

the appliance is required to carry out the work,

ensure all the necessary precautions are followed.

FO 0264

FO 0265

A) Ramp with ending nut

B) Seal

C) Adjustable connection

Fig. 3

IMPORTANT - To ensure a correct operation, a saving

of energy and the long-life of the appliance, the feeding

pressure of the appliance must correspond to the

recommended values.

The adjustable connection is fixed to the comprehensive

ramp by means of a threaded nut G 1/2". Interpose the

sealing between the components as shown in Fig. 3.

Screw the parts without forcing, adjust the connection in

the required direction and tighten everything.

The adjustable connection allows the feeding pipe to be

situated in the site purposefully allocated on the side of

the protection box of the hob itself (Fig. 4). This

connection allows the overall dimensions of the hob

plus the fedding pipe to be contained into a depth of 30

mm.

IMPORTANT - When the final connection has been

made, it is essential that a thorough leak test is carried

out on the hob and installation. Use some soapy water,

never a flame.

A) Ramp ending with nut

B) Adjustable connection

C) Rigid or flexible metallic gas pipe

Fig. 4