Zanussi ZGG66424 Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Варильна поверхня Zanussi ZGG66424. Zanussi ZGG66424 16 сторінок. Gas hob
Також для Zanussi ZGG66424: Посібник користувача (16 сторінок), Посібник користувача (16 сторінок), Посібник користувача (21 сторінок)
Друкувати сторінку
Warning! Pots must not enter the control
zone. Flame will heat up the control zone.
Do not put the same pan on two burners.
Warning! Make sure pot handles do not
protrude over the front edge of the
cooktop and that pots are centrally positioned
Care and cleaning
Warning! Refer to "Safety information"
chapter.
Warning! Deactivate the appliance and
let it cool down before you clean it.
Disconnect the appliance from the electrical
supply before you do cleaning or maintenance
work.
Warning! For safety reasons, do not clean
the appliance with steam cleaners or high-
pressure cleaners.
Warning! Do not use abrasive cleaners,
steel wool pads or acids. They can cause
damage to the appliance.
Scratches or dark stains on the surface
have no effect on how the appliance oper-
ates.
• You can remove the pan supports to easily
clean the hob.
• To clean the enamelled parts, cap and
crown, wash them with warm soapy water
and dry them carefully before you put them
back.
• Wash stainless steel parts with water, and
then dry them with a soft cloth.
• The pan supports are not dishwasher proof.
They must be washed by hand.
www.zanussi.com
on the rings in order to achieve maximum
stability and to obtain lower gas consumption.
Do not place unstable or deformed pots on the
rings to prevent from spill and injury.
Warning! Flame diffuser are not
recommended.
Information on acrylamides
Important! According to the newest scientific
knowledge, if you brown food (specially the one
which contains starch), acrylamides can pose a
health risk. Thus, we recommend that you cook
at the lowest temperatures and do not brown
food too much.
• When you wash the pan supports by hand,
take care when you dry them as the enamel-
ling process occasionally leaves rough
edges. If necessary, remove stubborn stains
using a paste cleaner.
• Make sure you position the pan supports
correctly after cleaning.
• To make the burners work correctly, make
sure that the arms of the pan supports are in
the centre of the burner.
• Be very careful when you replace the
pan supports to prevent the hob top
from damage.
After cleaning, dry the appliance with a soft
cloth.
The stainless steel can become tarnished if it is
too much heated. Refer to this you must not
cook with potstones, earthenware pans or cast
iron plates. Do not use aluminium foil to prevent
damage the top during operation.
9