Zanussi ZGG67412 Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Варильна поверхня Zanussi ZGG67412. Zanussi ZGG67412 16 сторінок.
Також для Zanussi ZGG67412: Посібник користувача (16 сторінок), Посібник користувача (32 сторінок)

Друкувати сторінку

Green and yellow

Blue

Brown

Replacement of the connection cable

1. Connect the green and yellow (earth) wire

to the terminal which is marked with the let-

ter 'E', or the earth symbol

green and yellow.

2. Connect the blue (neutral) wire to the ter-

minal which is marked with the letter 'N' or

coloured blue.

3. Connect the brown (live) wire to the termi-

nal which is marked with the letter 'L'. It

must always be connected to the network

phase.

There must be no cut or stray strands of wire

present. The cord clamp must be correctly at-

tached to the outer sheath.

To replace the connection cable use only

H05V2V2-F T90 or equivalent type. Make

sure that the cable section is applicable to the

voltage load and the working temperature. The

yellow/green earth wire (B) must be approxi-

mately 2 cm longer than the live and neutral wire

(A).

Warning! A cut off plug inserted into a 13

amp socket is a serious safety (shock)

hazard. Ensure that the cut off plug is disposed

of safely.

Important! The replacement of electric cable

must be carried out exclusively by the service

force centre or by personnel with similar

competencies, in accordance with the current

regulations.

- Earth

- Neutral

- Live

, or coloured

Building In

min. 600 mm

min. 100 mm

min. 55 mm

30 mm

A) supplied seal

B) supplied bracket

Caution! Install the appliance only on a

worktop with flat surface.

Possibilities for insertion

Kitchen unit with door

The panel installed below the hob must be easy

to remove and let an easy access in case a

technical assistance intervention is necessary.

30 mm

min 20 mm

60 mm

(max 150 mm)

A) Removable panel

B) Space for connections

min. 650 mm

550 mm