Zanussi ZHRN673K Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Варильна поверхня Zanussi ZHRN673K. Zanussi ZHRN673K 17 сторінок.

Друкувати сторінку

Problem

An acoustic signal sounds and

the hob deactivates.

An acoustic signal sounds

when the hob is deactivated.

The hob deactivates.

Residual heat indicator does

not come on.

Automatic Heat Up does not

operate.

You cannot activate the outer

ring.

There is a dark area on

the multiple zone.

The sensor fields become hot.

comes on.

and a number come on.

You can hear a constant beep

noise.

Possible cause

You touched 2 or more sensor

fields at the same time.

There is water or fat stains on

the control panel.

You put something on one or

more sensor fields.

You put something on the sen-

sor field

The zone is not hot because it

operated only for a short time

or the sensor is damaged.

The zone is hot.

The highest heat setting is set.

You decreased the heat setting

to 0.

It is normal that there is a dark

area on the multiple zone.

The cookware is too large or

you put it too near to the con-

trols.

Child Safety Device or Lock

operates.

There is an error in the hob.

The electrical connection is in-

correct.

Remedy

Touch only one sensor field.

Clean the control panel.

Remove the object from the

sensor fields.

Remove the object from the

sensor field.

If the zone operated sufficiently

long to be hot, speak to an Au-

thorised Service Centre.

Let the zone become suffi-

ciently cool.

The highest heat setting has

the same power as the func-

tion.

Start from 0 and increase the

heat setting.

First, activate the inner ring by

changing the heat setting.

Put large cookware on the rear

zones, if possible.

Refer to "Daily use".

Deactivate the hob and acti-

vate it again after 30 seconds.

comes on again, discon-

nect the hob from the electrical

supply. After 30 seconds, con-

nect the hob again. If the prob-

lem continues, speak to an Au-

thorised Service Centre.

Disconnect the hob from the

electrical supply. Ask a quali-

fied electrician to check the in-

stallation.