Zanussi ZKL 64 X Інструкція з експлуатації та монтажу - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та монтажу для Варильна поверхня Zanussi ZKL 64 X. Zanussi ZKL 64 X 12 сторінок. Electric ceramic-glass hob
Також для Zanussi ZKL 64 X: Посібник з монтажу та експлуатації (20 сторінок)
Cleaning and care
Clean your glass--ceramic hob thoroughly and regular-
ly, when it is hand--hot or cold. Avoid frequent burning
in of soiling.
Suitable for cleaning are:
Clean cloths or paper towels, cleansing agents such as
cerafix, Stahl-fix, WK Top a.s.o. and a razor blade scra-
per supplied by the manufacturer.
The cleaning scraper is applied at an angle towards the
ceramic glass surface; residues from roasting and boil-
ing over are to be scraped off with a sliding blade.
Wipe off light soiling with a damp cloth, possibly using
washing--up liquid.
Persistent soiling can be easily removed using the ra-
zor blade scraper. Clean calcareous and water rings,
fat splashes and metallically gleaming discolourations
using ceramic-glass- or stainless steel cleanser such
as Sigolin-Chrom or Stahlfix .
Cleaning agents must not get onto the hot ceramic
glass surface.
Cleansing agents have always to be wiped off comple-
tely with a damp cloth, as they have an corrosive effect
when reheated. Finally wipe dry.
Never use any aggressive or scouring clean-
sing agents such as grill or oven sprays, stain
or rust removers, scouring powder or scouring
sponges.
. . . .
when a chemical cleansing agent is not suffi-
cient
. . . .
when dark stains have appeared
. . . .
when metallic discolouration appears in the
cooking surface
. . . .
When the surface shows scratches or hollows
Special problems
The razor blade scraper can facilitate the cleaning.
If cleaning with the razor blade scraper and Stahl--fix or
Sidol does not help any, the decor has presumably
been rubbed down by unsuitable cleansing agents or
scouring pot bottoms.
The cleansing agents that have been used were for the
most part unsuitable. The discolouration can only be
removed with difficulty using Sidol or Stahl--fix.
These flaws caused by scratching or melted objects
cannot be removed any more, but they do not reduce
the efficiency.
18