Zanussi ZKT 621 LN Інструкція з експлуатації та монтажу - Сторінка 9

Переглянути онлайн або завантажити pdf Інструкція з експлуатації та монтажу для Варильна поверхня Zanussi ZKT 621 LN. Zanussi ZKT 621 LN 22 сторінки. Elektric ceramic glass hob
Також для Zanussi ZKT 621 LN: Посібник з монтажу та експлуатації (18 сторінок)

Друкувати сторінку

Zanussi ZKT 621 LN Інструкція з експлуатації та монтажу

Cooking zone selection

To activate a cooking zone keep the correspon-

ding control touched for about one second. A zero

with digital point

ding cooking zone display.

Setting selection

For selecting or changing the setting for the coo-

king zone from

use the

touch control to increase the setting.

use the

touch control to reduce the setting.

Cooking zone switch- -off

1. Select the desired cooking zone by means of

the cooking zone touch control.

2. For switching off push the

trols at the same time or return to zero with the

touch control.

Residual heat indicator

After switching off a single cooking zone or the entire

hob any residual heat is indicated by

in the display of the corresponding cooking zone.

Even after switching off a cooking zone the residual

heat indicator will go out only after sufficient cooling

down of the cooking zone.

The residual heat can be used for the melting and

keeping dishes warm.

Caution! While the

and there is a risk of burning.

Caution! If there is a power failure the

out even if there is residual heat in the hob. Care

will have to be taken until there is no longer a risk

of burning.

comes on in the correspon-

- -

and

touch con-

("hot")showing

is illuminated the hob is hot

will go