Zanussi ZFC627WAP Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Морозильна камера Zanussi ZFC627WAP. Zanussi ZFC627WAP 12 сторінок. Chest
Також для Zanussi ZFC627WAP: Посібник користувача (8 сторінок), Посібник користувача (12 сторінок), Посібник користувача (13 сторінок)

Друкувати сторінку

• Make sure that the mains plug is accessible

after the installation of the appliance.

Service

• Any electrical work required to do the servic-

ing of the appliance should be carried out by

a qualified electrician or competent person.

• This product must be serviced by an author-

ized Service Centre, and only genuine spare

parts must be used.

Environment Protection

This appliance does not contain gasses

which could damage the ozone layer, in ei-

Operation

Switching on

Insert the plug into the wall socket.

Turn the Temperature Regulator to the Full Loa-

ded position and let the appliance run for 24

hours to allow the correct temperature to be

reached before placing food inside.

Adjust the Temperature Regulator according to

the quantity of the stored foods.

A Temperature Regulator

B Half Loaded position

Control panel

Temperature regulator

Pilot light

ther its refrigerant circuit or insulation materials.

The appliance shall not be discarded together

with the urban refuse and rubbish. The insula-

tion foam contains flammable gases: the appli-

ance shall be disposed according to the appli-

cable regulations to obtain from your local au-

thorities. Avoid damaging the cooling unit, espe-

cially at the rear near the heat exchanger. The

materials used on this appliance marked by the

symbol

are recyclable.

C Full Loaded position

Switching off

To turn off the appliance, turn the Temperature

Regulator to the "OFF" position.

Temperature regulation

The temperature within the appliance is control-

led by the Temperature Regulator situated on

the control panel.

To operate the appliance, proceed as follows:

• turn the Temperature Regulator toward lower

settings to obtain the minimum coldness.

• turn the Temperature Regulator toward higher

settings to obtain the maximum coldness.

In case of freezing less food volumes, the

Half Loaded setting is the most suitable.

In case of freezing much food volumes, the Full

Loaded setting is the most suitable.

High temperature alarm light

High temperature alarm

An increase in the temperature in the freezer (for

example due to an power failure) is indicated by

switching on of the Alarm light

During the alarm phase, don't place food inside

the freezer.

When normal conditions are restored the Alarm

light will switch off automatically.