Zanussi ZHC960 Інструкція з експлуатації Посібник з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Вентиляційна витяжка Zanussi ZHC960. Zanussi ZHC960 13 сторінок. Zanussi owners manual ventilation hood zhc960
Також для Zanussi ZHC960: Інструкція з експлуатації (17 сторінок)

Друкувати сторінку

Zanussi ZHC960 Інструкція з експлуатації Посібник з експлуатації

• Assemble the two halves of the hood body

extension piece 14 14 14 14 14.

• Push fit the assembled hood body extension

piece 14 14 14 14 14 onto the air outlet.

• Push fit connection 15

extension piece 14 14 14 14 14.

• Insert the connection extension pieces laterally

14.1

14.1 in connection 15 15 15 15 15.

• Make sure that the outlet of the extension pieces

14.1

14.1 is horizontally and vertically aligned with

the chimney outlets. If this is not the case, adjust

the position by either reversing the connection

14.1

extension pieces 14.1

14.1

14.1 or by cutting the hood

14 14

14 14 along one of the thinner

body extension 14

section channels denoting the pre-fixed lengths,

then reassemble as described previously.

• The air outlet directional grills 8a 8a 8a 8a 8a - 8b 8b 8b 8b 8b must be

fitted after the lower outlet duct 2.2

installed.

• Ensure that the activated charcoal filters have

been inserted.

• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm.

Upper exhaust flue

• Slightly widen the two sides of the upper flue

and hook them behind the brackets 7.2.1

making sure that they are well seated.

• Secure the sides to the brackets using the 4

screws 12c

12c

12c (2,9 x 9,5) supplied.

12c

Lower exhaust flue

• Slightly widen the two sides of the flue and hook

them between the upper flue and the wall,

making sure that they are well seated.

• Fix the lower part laterally to the hood body

using the 2 screws 12c

• On the recirculation version, fit the directional

grids 8a 8a 8a 8a 8a - 8b 8b 8b 8b 8b in their housings making sure that

the directional symbols are towards the top and

front of the hood. Also make sure that they are

correctly inserted in the connection extension

14.1

pieces 14.1

14.1.

14.1

RECIRCULATION VERSION AIR OUTLET

15 15 onto the hood body

15 15

2.2

2.2 has been

ELECTRICAL CONNECTION

Flue assembly

12c

12c (2,9 x 6,5) supplied.

12c

7.2.1

7.2.1,

7.2.1