Zanussi ZHT610W UK Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Вентиляційна витяжка Zanussi ZHT610W UK. Zanussi ZHT610W UK 17 сторінок.
Також для Zanussi ZHT610W UK: Посібник з монтажу (16 сторінок)

Друкувати сторінку

Venting

The hood is more effective when used in the extraction

setting (ducted to the outside).

Venting kits maybe purchased through your retailer or DIY

store, and must be ducted to an outside vent of 100mm

(4") minimum.

The ducting used must be manufactured

from fire retardant material which should

conform to the relevant British Standard

or DIN4102-B1.

When the hood is ducted externally the

charcoal filter must be removed and the slider

control must be in the ducting position.

To Fit the Ducting

Fit the ducting spigot and blanking plate, by ali-

gning the interlocking lugs on the fittings, with the

recesses in the aperture.

Insert and turn anti-clockwise to lock spigot and

blanking plate into position.

Remove the charcoal filter and ensure the slider

control is in the ducting position.

To Remove the Charcoal Filter

Remove the metal inlet grille.

Carefully twist the plastic disc anticlockwise, while

holding the charcoal filter secrurely.

Clean the metal inlet grille and motor support

before replacing the charcoal filter.

Recirculation

The charcoal filter must be fitted for recirculation and the

slider control must be in the recirculation position.