Zanussi 943006147 Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Кухонні плити Zanussi 943006147. Zanussi 943006147 28 сторінок.

Друкувати сторінку

light the burner. Release the spark

generator button when burner lights.

Keep the knob for the oven functions

pushed for 15 seconds or less to let the

thermocouple warm up. If not, the gas flow

is interrupted.

Manual ignition of oven gas burner

In case of absence of the electricity you can

ignite the oven burner without an electrical

device.

1. Open the oven door.

2. Hold the flame near the hole in the bottom

of the oven cavity.

3. At the same time push the knob for the

oven functions and turn it counterclockwise

to the maximum gas flow position.

4. When the flame comes on, keep the knob

for the oven functions pushed on the

maximum gas flow position for 15 seconds

or less to let the thermocouple warm up.

Do not keep the knob for the oven

functions pushed for more than 15

seconds. If the oven burner does not

light after 15 seconds, release the

knob for the oven functions, turn it

into off position, open the oven door

and try to light the oven burner again

after minimum 1 minute.

After igniting the oven gas burner

1. Release the knob for the oven functions.

2. Close the oven door.

3. Turn the knob for the oven functions to set

the necessary heat setting.

Control the flame trough the holes in the bottom

of the oven.

Turning off the oven burner

To put out the flame, turn the knob to the off

position

Using the grill

CAUTION!

Always keep the appliance door

closed when the grill operates.

Do not put the meat directly on the

tray or pan.

CAUTION!

Do not put the meat on the highest

shelf level. There is a risk of fire.

1. Open the oven door.

2. Ignite the grill burner.

• For manual ignition hold a flame near the

grill burner holes. Push and turn the

knob for the grill to the flame position.

Hold the knob pushed down.

• For ignition on the spark generator

button push and hold the spark

generator button. Push and turn the

knob for the grill to the flame position.

Hold the knob pushed. Release the

spark generator button when burner

lights.

3. Hold the knob for the grill pushed for

approximately 15 seconds.

4. Release the oven control knob.

The grill temperature can be adjusted. To

lower the temperature turn the knob for the

grill counterclockwise.

If the grill does not come on or if it

accidentally goes out release the knob for

the oven functions and turn it to the Off

position. Open the oven door. After one

minute, try to light the grill again.

5. Preheat the grill for 5 to 10 minutes.

6. Put the oven shelf with the meat on shelf

position 3.

7. Put a baking tray or roasting pan below, on

shelf position 2, to collect the juices.

If there is temporarily no power supply open the

oven door hold a flame near the grill burner

holes and turn the lnob for the gas to the flame

position.

Turning off the grill burner

To put out the flame, turn the knob to the off

position