Zanussi ZCG5000 Посібник користувача - Сторінка 37

Переглянути онлайн або завантажити pdf Посібник користувача для Кухонні плити Zanussi ZCG5000. Zanussi ZCG5000 40 сторінок. Gas cooker
Також для Zanussi ZCG5000: Інструкція з експлуатації (48 сторінок)

Друкувати сторінку

2. Mark off 250mm from the left hand side

of the appliance as shown in dimension

' A' , Fig 3a. This is the centre line of the

fixing bracket.

3. Draw a line 100mm from the front edge

of the feet (see Fig.3a) and remove

appliance from its position. Mark off

dimension ' B' (see Fig.3a) back from this

line on the centre line of the bracket to

locate the front edge of the lower

bracket.

Fix lower bracket (with two

fixing holes) to the floor then measure

the height from floor level to engagement

edge on back of appliance, dimension ' C'

of Fig. 3b.

4. Assemble upper bracket to lower bracket

so that the underside of bracket is

dimension ' C' + 3mm above floor level.

(See Fig. 3b)

Reposition appliance and check that top

bracket engages into appliance back as

shown in Fig. 3b.

The battery

1. The battery is located on the left hand

side of the front plinth.

2. To gain assess to the battery, open the

main oven door and lift up the battery

holder lid.

3. Fit the new battery ensuring (+) terminal

is next to the (+) sign on the battery.

See Fig. 4.

4. Close the lid of the battery holder.

Pressure testing

The oven injector is used as a pressure

test point.

Remove the oven furniture. Remove

oven burner box retaining clips (one

spring clip from each side) and remove

box front cover. Replace one clip back

into the right hand side of the burner

box.

20mm

100mm

250mm

(A)

Fig.3a.

Fig.4.

(C)

Fig.3b.