Directed DIRECTECHS HK14 Посібник з монтажу - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з монтажу для Автомобільна електроніка Directed DIRECTECHS HK14. Directed DIRECTECHS HK14 19 сторінок.

Друкувати сторінку

Wiring connections

The wiring connections listed below are specific to this firmware.

Main power harness (H1), 12-pin thick gauge connector

Conn./Pin

Color

H1/1

White

H1/2

White/Brown

H1/3

Brown/Red

H1/4

Yellow/Red

H1/5

Orange/Red

H1/6

Yellow

H1/7

White

H1/8

White/Brown

H1/9

Black

H1/10

Red

H1/11

Orange/Yellow

H1/12

Brown

Auxiliary output harness (H2), 16-pin black connector

Conn./Pin

Color

H2/1

Violet/Brown

H2/2

Yellow/Black

H2/3

Orange/Black

H2/4

Tan

H2/5

Tan/Black

H2/6

Light Green

H2/7

Orange/Green

H2/8

Orange/Brown

H2/9

Violet/Green

H2/10

Green/Black

H2/11

White/Violet

H2/12

White/Red

H2/13

Lt. Blue/Black

H2/14

Green/Red

H2/15

N/A

H2/16

Violet/Yellow

If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed.

If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. Note that they are low current and a relay

may be necessary.

Description

Relay 3 COM – – No Connection

Relay 3 N.O. – No Connection

Relay 2 N.O. – No Connection

Relay 2 COM – Accessory Interrupt (connector side)

Relay 2 N.C. – Accessory Interrupt (vehicle side)

Relay 1 COM – Ignition Interrupt (vehicle side)

Relay 3 COM – No Connection

Relay 3 N.O. – No Connection

(-) Ground

(+) 12 Volt (battery)

Relay 1 N.C. – Ignition Interrupt (connector side)

Relay 1 N.O. – (+) Power 12 Volt

Description

(MUX) Parking Lights Output

Immo. Data

No Connection

HS CAN 1 Low

HS CAN 1 High

No Connection

HS CAN 2 High

HS CAN 2 Low

No Connection

Directed Digital Solutions HK14