Command
delete static-routes all
dhcp-server [x] ip
domain
dot1x
dot1x authentication-method
dot1x dhcp-launch
dot1x max-user
dot1x port-control
dot1x port-method
dot1x quiet-period
dot1x retry
dot1x supp-proxy-check
dot1x timer
dot1x timer handshake-period
end-station polling ip-
address
execute
fabric-port [x] enable
file prompt
ftm stacking-vlan
ftp server
ftp timeout
header
igmp-snooping enable
igmp-snooping disable
igmp-snooping host-aging-
time
igmp-snooping max-response-
time
igmp-snooping router-aging-
time
info-center channel name
info-center console channel
info-center enable
info-center logbuffer
info-center monitor channel
info-center snmp channel
info-center source
info-center switch-on
info-center timestamp
info-center trapbuffer
interface Gig Ethernet
interface vlan-interface
ip host
Description
Delete all the static routes
Configure the IP address of the DHCP Server used by the
DHCP Server group. X= group number
Configure an ISP domain or enter the view of an existing ISP
domain
Specify 802.1x configuration information
Specify authentication method for 802.1x users
Trigger system authentication when receiving DHCP packet(s)
Specify maximal on-line user number per port
Specify port authenticated status
Specify port controlled method
Enable quiet period timer
Specify maximal request times
Check whether user(s) access the networks by proxy or not
Specify timer parameters
Set the handshake period of 802.1x
Configure the Switch to periodically test specified end-
stations by sending PING packets
Run the batch file
Specify the fabric port of the Switch. Specify x = Gig interface Port -> Administration
Modify prompt modes of file operations
Specify the stacking VLAN of the Switch
Start or shutdown the FTP server
Configure the FTP connection timeout interval
Define the login banner
IGMP snooping enable
IGMP snooping disable
Configure the port aging time of the multicast group
members
Configure the maximum response time for a query
Configure the router port aging time of IGMP Snooping
Rename a channel
Configure the channel through which log information is
output to the console
Enable the system log
Configure to output information to the memory buffer
Configure the channel to output the log information to the
user terminal
Specify new channel for transmitting the SNMP information
Add or delete a record to the information channel
Turn on the information synchronization on the specified
Switch
Configure the timestamp output format in debugging/trap
information
Output information to the trap buffer
Enter Ethernet Port View (See
on page
15)
Enable VLAN interface and enter VLAN interface view (See
Table 14, "VLAN Inteface View," on page
Configure the host name and the host IP address
8
Table 15, "Ethernet Port View,"
14)
Web Command
Device -> IP Route
Device -> XRN Fabric
Device -> IGMP Snooping
Device -> VLAN Interface
Administration -> IP Setup
Друкувати сторінку