Directed Directechs DB3 Посібник з монтажу - Сторінка 18

Друкувати сторінку

Directed Directechs DB3 Посібник з монтажу

Quick Reference Guide (customer copy)

Sending commands to your vehicle

Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, there

are 3 possible ways you can send commands to your vehicle, using the:

Factory remote.

2. Aftermarket remote.

3. Directed SmartStart

application via your smartphone.

If applicable, you can also start the engine remotely by pressing the Lock button 3 times

quickly on your factory remote.

Vehicle takeover with Get In and Go

Close the vehicle doors, hood and trunk, then press

the Remote Start button on the transmitter to start the

vehicle.*

Press the Unlock button on the factory or aftermarket

remote.*

Complete the following steps within 45 seconds or the vehicle will shut down.

Enter the vehicle, while making sure the factory remote is

inside with you, and close the door.

Depress the brake pedal for a minimum of 3 seconds then

put the car in gear and drive off.

* Icon and remote appearance may differ depending on the model purchased.

Get In and Go

Get In and Go is designed to provide users with easy takeover when entering their Push-to-

Start (PTS) equipped vehicle, once it has been remote started.

Typically, users would have to remote start their vehicle, then get inside and press the PTS

button to perform a takeover. There is therefore a physical action required to drive away.

With Get In and Go, you simply remote start the vehicle, unlock the doors, get in and go...

All that's left to do is put the gear in drive and drive off.

403.CHRYSLER15 1.16 2021 Jeep Wrangler (Smart Key)

Pit stop/idle mode

Stop the vehicle in a safe parking spot and put the gear

in Park (P).

Press the Remote Start button on the transmitter.*

The parking lights will flash once to indicate the vehicle is

now in Pit Stop Mode.

Exit the vehicle with the factory remote in hand (it is safe

to leave the engine running).

Note: We recommend that you always lock the doors of

your vehicle when leaving it unattended.

Press Remote

Start button*

* Icon and remote appearance may differ depending on the model purchased.

Remote Start Ready (RSR)

Press Unlock on

either remote*

14:36

3x OEM Lock Remote Start Activation

Enter vehicle

with remote

This solution includes the option to remote start your vehicle by pressing the Lock button

Ready to

3 times consecutively. If your vehicle allows the OEM remote to remain active while the

drive off

engine is running, you may shut down your remote starter by pressing the Lock button 3

times once more.

Note: The range offered by OEM remotes is limited and typically requires you to be within

eyesight of the vehicle to control it.

14:36

Remote Start Ready (RSR) is a function that enables the interface module

to remote start the vehicle completely on its own. Consequently, there is

no need for an aftermarket or an OEM remote starter in order to start the

vehicle from a distance.

Put

gear in

Park

Parking lights flash x1

Press Remote

Start button*

14:36

Exit vehicle

with remote