Clarke 3052005 Інструкція з експлуатації та технічного обслуговування - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації та технічного обслуговування для Шліфувальна машина Clarke 3052005. Clarke 3052005 8 сторінок. 4” polishing kit

Друкувати сторінку

WHAT IS SUPPLIED

The polishing kit is supplied with

• 1 tapered shaft

• 1 stick of polishing compound

• 1 polishing wheel

• 1 buffing wheel

SETUP

FITTING THE POLISHING WHEEL TO THE ELECTRIC DRILL

1. Fit the tapered shaft into the drill chuck.

2. Whilst holding the drill chuck with

one hand, screw the polishing

wheel onto the tapered shaft until

it is secure.

BUFFING WHEEL.

The buffing wheel is fitted in the same

way as above.

ADDING COMPOUND TO THE POLISHING WHEEL

1. Squeeze the trigger on the drill.

2. When the wheel has reached

maximum speed, apply the

polishing compound to the wheel

gently as shown.

3. Turn off the drill and allow it to

come to a stop.

4. The polishing wheel is now ready

for use.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]