Clarke 6462013 Інструкція з експлуатації та технічного обслуговування - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та технічного обслуговування для Шліфувальна машина Clarke 6462013. Clarke 6462013 17 сторінок. Oscillating bobbin sander
Друкувати сторінку
13. Do not overreach
• Keep proper footing and
balance at all times.
14. Maintain tools with care
• Keep cutting tools sharp and
clean for better and safer
performance.
• Follow instruction for lubricating
and changing accessories.
• Inspect tool cords periodically
and if damaged have them
repaired by an authorized
service facility.
• Inspect extension cords
periodically and replace if
damaged.
• Keep handles dry, clean and
free from oil and grease.
15. Disconnect tools
• When not in use, before servicing
and when changing accessories
such as blades, bits and cutters,
disconnect tools from the power
supply.
16. Remove adjusting keys and
wrenches
• Form the habit of checking to
see that keys and adjusting
wrenches are removed from the
tool before turning it on.
17. Avoid unintentional starting
• Ensure switch is in "off' position
when plugging in.
18. Use outdoor extension leads
• When the tool is used outdoors,
use only extension cords
intended for outdoor use and so
marked.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
19. Stay alert
• Watch what you are doing, use
common sense and do not
operate the tool when you are
tired.
20. Check damaged parts
• Before further use of tool, it
should be carefully checked to
determine that it will operate
properly and perform its
intended function.
• Check for alignment of moving
parts, binding of moving parts,
breakage of parts, mounting
and any other conditions that
may affect its operation.
• A guard or other part that is
damaged should be properly
repaired or replaced by an
authorized service centre unless
otherwise indicated in this
instruction manual.
• Have defective switches
replaced by an authorized
service centre.
• Do not use the tool if the switch
does not turn it on and off.
21. Warning
• The use of any accessory or
attachment other than one
recommended in this instruction
manual may present a risk of
personal injury.
22. Have your tool repaired by a
qualified person
• This electric tool complies with
the relevant safety rules. Repairs
should only be carried out by
qualified persons using original
spare parts, otherwise this may
result in considerable danger to
the user.
5