Clarke OBS-18DC Посібник оператора - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник оператора для Шліфувальна машина Clarke OBS-18DC. Clarke OBS-18DC 14 сторінок. Orbital sander
Також для Clarke OBS-18DC: Експлуатація та безпека (2 сторінок)

Друкувати сторінку

1. Troubleshooting

Machine Setup

To prepare the machine for use follow this procedure:

1. Familiarize yourself with the machine. Read all

danger, warning, and caution statements and the

Operation and Parts Manual before operating the

machine. If you or the operator are unable to read

English, have this manual fully explained before

attempting to operate this machine.

2. Install or replace pad. The pad should be replaced

if it has become matted down to a thickness of 3/

8" or less. To install or replace the pad, follow

these instructions:

a.) Lock handle in the upright position.

b.) Tilt the machine back until it fully rests on the

handle.

c.) Standing over the machine, remove existing

pad then center new pad over pad driver.

d.) Press pad against pad driver until the hooks

in the driver have set in the pad. See figure

e.) Return machine to the upright position.

CAUTION:

Damage to the pad driver will occur if

the machine is operated without a pad

or with a pad that is 3/8" or thinner.

WARNING: Never put yourself or let others be in

a position to get injured if the

machine should tip or fall, while

replacing the pad or changing

abrasive.

American Sanders OBS-18/18 DC Operator's Manual

Clarke

Figure # 3

Page 5