Clarke PS105 Інструкція з експлуатації та технічного обслуговування - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та технічного обслуговування для Шліфувальна машина Clarke PS105. Clarke PS105 8 сторінок.
Друкувати сторінку
Electrical Connections
Connect the mains lead to a standard 230V (50Hz) electrical supply through an approved
13 Amp BS1363 plug, or a suitably fused isolator switch.
WARNING: This appliance is DOUBLE INSULATED
IMPORTANT: The wires in the mains lead are coloured in accordance with
the following code:
As the colours of the flexible cord of this appliance may not correspond with the coloured
markings identifying terminals in your plug proceed as follows:
•
Connect BROWN coloured cord to plug terminal marked with a letter L or coloured
RED
•
Connect BLUE coloured cord to plug terminal marked with a letter N or coloured
BLACK
IMPORTANT: If this appliance is fitted with a plug which is moulded on to
the electric cable (i.e. non- re-wireable) please note:
1. The plug must be thrown away if it is cut from
the electric cable. There is a danger of electric
shock if it is subsequently inserted into a socket
outlet.
2. Never use the plug without the fuse cover
fitted.
3. Should you wish to replace a detachable fuse
carrier, ensure that the correct replacement
is used (as indicated by marking or colour
code).
4. Replacement fuse covers can be obtained from your local dealer or most electrical
stockists.
5. The fuse in the plug must be replaced with one of the same rating (13 amps) and this
replacement must be approved to BS1362.
IMPORTANT: If in any doubt, do not attempt any electrical repair yourself.
Consult a qualified technician.
If a cable extension is needed, it is essential to comply with the following data.
Voltage
230v
230v
Blue
-
Neutral
Brown
-
Live
IMPORTANT:
Extension length
Up to 20m
From 20 to 50m
Cable section
2.5mm
2
4mm
2
-4-