Alemite 7149-H4 Інструкція з експлуатації Посібник з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Водяний насос Alemite 7149-H4. Alemite 7149-H4 14 сторінок. Hand operated bucket pumps
Друкувати сторінку
SER 7149-4
TO FILL CONTAINER:
1. Raise lever and wipe off tip of container.
2. Loosen knurled thumb screws and slide cover to one side.
3. Fill container with lubricant, being careful that no air pockets are formed.
TO USE:
1. Check condition of hose and check to see that all connections are secure.
2. ADJUSTMENT INSTRUCTIONS:
Set lever at appropriate position (Figure 11)
a. for lightweight lubricants and warm temperatures.
b. for lubricants of medium thickness.
c. for cold weather and/or thick lubricants.
(To change positions, remove wing nut 79882 and slide pin 322423, with the wing
nut still attached, into alternate hole.)
2. Wipe fitting and coupler and place coupler on fitting.
3. Pump lubricant into bearing. Remove coupler.
4. Wrap hose around bucket and attach coupler to fitting on top of container. On most
models, this fitting serves as a pressure release and allows excess lubricant to run
back into the container.
IF PUMP FAILS TO BUILD UP PRESSURE OR DELIVER LUBRICANT:
1. Check if lubricant level is low or if air pockets have developed, allowing air to enter
pump.
2. Check hose and connection for leaks.
3. If pressure still fails to build up, overhaul pump with Major Repair Kit 398724 or
replace.
Alemite, LLC
Hand Operated Bucket Pump
OPERATION
7
Revision (8/06)