Directed Electronics Hornet 719T Посібник користувача - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник користувача для Автосигналізація Directed Electronics Hornet 719T. Directed Electronics Hornet 719T 20 сторінок. Directed electronics owner's guide vehicle security system 719t
Друкувати сторінкуIf the current setting is unacceptable, press
the sensitivity or
is pressed, the unit will emit one chirp and the sensitiv-
ity is decreased one step. Each time
will emit two chirps and the sensitivity will be increased one
step. There are 16 possible settings. When the maximum or
minimum setting (Warn-Away
emit a long chirp.
Adjusting the Shock Sensor Full Trigger
1.
Arm the system by pressing
2.
Within five seconds, press and hold
until the unit generates a long chirp.
3.
Release
on the transmitter.
To Test and Adjust the Current Full Trigger Setting
Strike the vehicle to test the current setting. If the impact is
detected the unit will chirp three or four times.
If the current setting is acceptable do nothing and the unit
will exit shock sensor adjustment mode.
If the current setting is unacceptable press
the sensitivity or
is pressed, the unit will emit one chirp and the sensitiv-
ity is decreased one step. Each time
will emit two chirps and the sensitivity will be increased one
step. There are 16 possible settings. When the maximum set-
8
to increase the sensitivity. Each time
is pressed, the unit
™
off) is achieved, the siren will
on your transmitter.
on the transmitter
to increase the sensitivity. Each time
is pressed, the unit
1999 Directed Electronics, Inc.
©
to decrease
to decrease