Clarke CSE2 Інструкція з експлуатації та технічного обслуговування - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та технічного обслуговування для Водяний насос Clarke CSE2. Clarke CSE2 17 сторінок. Submersible water pumps
Друкувати сторінку
- 1. Pump Specification
- 2. Safety Precautions
- 3. Electrical Connections
- 4. Using the Pump
- 5. Maintenance
- 6. Troubleshooting
- 7. Declaration of Conformity
- 8. Exploded Parts Diagram - Csv1A/2A
- 9. Parts List
- 10. Exploded Parts Diagram - Cse2
- 11. Environmental Recycling Policy
- 12. Exploded Parts Diagram - Csd3
PREPARATION
WARNING: DISCONNECT THE PUMP FROM THE MAINS POWER SUPPLY
BEFORE CONNECTING THE MULTI HOSE ADAPTOR.
1.
Fit the elbow adaptor to the
pump outlet as shown in the
diagram opposite.
2. Screw the multi-hose adaptor
onto the elbow.
• The multi hose adaptor is
capable of accepting 1",
"
¾
½
and
" hoses.
3.
Simply cut the multi hose
connector to the required size
and attach a suitable hose using
with a worm drive clip.
• For maximum efficiency, we
strongly recommend that you
connect a 1
to the multi hose adapter.
• Alternatively, you may remove
the multi adapter altogether,
and screw on a 1
The pump is completely submersible and should be placed in a vertical
position on a solid flat surface, placing the pump on a couple of house bricks if
required.
SUITABLE HOSES AND SPARE/REPLACEMENT MULTI HOSE ADAPTERS ARE
AVAILABLE FROM YOUR CLARKE DEALER.
¼
" diameter hose
¼
" BSP hose adapter.
ELBOW
½
"
¾"
1"
5