Directed Electronics WASP 718W Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Автосигналізація Directed Electronics WASP 718W. Directed Electronics WASP 718W 20 сторінок. Dei wasp 718w: owners guide

Друкувати сторінку

Shock Sensor Adjustment

The system features a Doubleguard
unit. All adjustments to the sensor are made using the transmitter.

Adjusting the Shock Sensor Warn-Away

1.
Disarm the system by pressing
2.
Within five seconds, press and hold
until the unit generates a long chirp.
3.
Release
on the transmitter.

To Test and Adjust the Current Warn-Away Setting

Strike the vehicle to test the current setting. If the impact is
detected the unit will chirp three times.
If the current setting is acceptable, do nothing and the unit
will exit shock sensor adjustment mode.
If the current setting is unacceptable, press
the sensitivity or
is pressed, the unit will emit one chirp and the sensitiv-
ity is decreased one step. Each time
will emit two chirps and the sensitivity will be increased one
step. There are 16 possible settings. When the maximum or
minimum setting (Warn-Away
emit a long chirp.
1999 Directed Electronics, Inc.
©
®
shock sensor inside the control
on the transmitter.
on the transmitter
to increase the sensitivity. Each time
is pressed, the unit
™
off) is achieved, the siren will
to decrease
7