Directed Electronics 4103 Series Посібник з монтажу - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник з монтажу для Пульт дистанційного керування Directed Electronics 4103 Series. Directed Electronics 4103 Series 20 сторінок. Remote start with keyless entry; multi-button remote
Також для Directed Electronics 4103 Series: Короткий посібник з встановлення (2 сторінок)
Друкувати сторінку
Menu 2
Feature #
Feature
1
Engine check-
ing
2
Engine
Runtime
3
Park light
output
4
Cranking
time
5
Activation
pulse count
6
2nd Ignition
behavior
7
Accessory
output
8
2nd Status
behavior
9
Anti-grind
10
Diesel start
delay
11*
Timer mode
run time
*Not available on the 1-button remote
1. Engine checking
1. VirtualTach: battery voltage drop/rise during cranking determines when the starter output is
released. During runtime, constant voltage level is monitored to determine if the engine is running.
2. Voltage: starter output during cranking is a programmed duration (Set in Cranking Time). During
runtime, constant voltage level is monitored to determine if the engine is running.
3. Off: starter output during cranking is a programmed duration (Set in Cranking Time). The remote
start keeps the ignition/accessories active for the programmed runtime whether the engine is running
or not.
4. Tachometer: tach input signal during cranking and runtime determines when the starter output is
released and if the engine is running.
2. Engine Runtime
•
12/24/60 minutes: sets engine runtime during normal remote start operations.
3. Park light output
1. Pulsed: the lights will pulse on/off during remote start.
2. Constant: the lights will turn on solid during remote start.
4. Cranking time
•
0.6/0.8/1.0/1.2/1.4/1.6/1.8/2.0/4.0 seconds: determines the starter output duration during
cranking for the 'Voltage' and the 'Off' Engine Checking Mode options.
5. Activation pulse count
•
1/ 2/ 3 pulses: sets the number of remote control commands received or Activation Input required
to activate and de-activate remote start.
© 2012 Directed. All rights reserved.
Opt. 1
Opt. 2
Virtual
voltage
tach
12 min
24 min
Constant
Pulsed
0.6 sec.
0.8 sec.
1 pulse
2 pulses
Ignition
Accessory
Off during
On during
wait-to-start
wait-to-
start
Normal
Latch rear
defogger
On
Off
Off
Timed 15 sec
12 min
3 min
Opt. 3
Opt.4
Off
tachometer
60 min
1.0 sec.
1.2 sec.
3 pulses
Pulse rear
defogger
Timed 30
Timed 45
sec.
sec.
6 min
9 min
Opt. 5+
1.4, 1.6, 1.8, 2.0, 4.0 sec
13