Directed Electronics ProStart CT-3371 Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Пульт дистанційного керування Directed Electronics ProStart CT-3371. Directed Electronics ProStart CT-3371 12 сторінок. 4-button automatic/manual transmission remote starter
Друкувати сторінку
Advanced Features: Installationprogrammable
Options
The Remote Car Starter was designed with flexibility and OEM integration in mind. With its
programmable options, this unit can single-handedly control nearly any electrical system in your
vehicle.
Caution
: The programming of your system should be left to a professional. Changing any
one of the settings may affect the operation of your Remote Car Starter. Please note that the
following programmable options may require additional parts and labor.
Ignitioncontrolled Door Locks
This is an added security feature. If your Remote Car Starter was installed with the Ignition-
Controlled Door Locks option, the doors will automatically lock as soon as the ignition key is turned
to the
IGNITION ON (RUN)
any door that was unlocked and opened (then closed) the next time the break pedal is pressed.
When the key is turned to the
Secure Lock
(Disabled by default.) Before your vehicle can be remote-started, the factory security system must
first be disarmed. The Secure Lock feature may be required on certain vehicle models with factory
security systems that automatically unlock the doors when the security system is disarmed.
To keep your vehicle protected when the factory security system is disarmed for a remote start,
Secure Lock will relock your doors as soon as the vehicle is started. Once the engine is shut down
by remote or after its runtime has expired, Secure Lock will also rearm your factory security system
and relock the doors.
Engine Run Time
If you have a gas engine, your system can be programmed to run the engine for 3, 15, or 25
minutes (15 min default). If you have a diesel engine, it can be programmed to run the engine for 8,
20, or 30 minutes (20 min default).
Turbo Mode
If Turbo Mode is configured at installation, it will allow a turbocharger to idle down after the user
leaves the vehicle: the unit will take over the vehicle and keep it running for 60 seconds (or until it
is shut down by remote control), then shut down the engine.
If your vehicle has an automatic transmission, proceed as follows to set the system to Turbo
Mode:
1.
With the engine running, make sure to release the brake pedal and press the
or
button on the transmitter until the parking lights come ON.
2.
Remove the ignition key from the ignition switch.
The engine will continue running.
3.
Exit the vehicle and close all doors, hood and trunk.
4.
Press the
Mode.
5.
The engine will shut down after 60 seconds.
If your vehicle has a manual transmission, follow all steps of the Ready Mode routine (page-4) to
activate Turbo Mode. At the last step,
User guide
position while the brakes are pressed. The remote car starter will also lock
position, the doors will automatically be unlocked.
OFF
button; this will lock the doors and confirm that the vehicle is in Turbo
,
P. 9