Clarke Strong Arm CS10PRH Інструкція з експлуатації та обслуговування - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та обслуговування для Водяний насос Clarke Strong Arm CS10PRH. Clarke Strong Arm CS10PRH 13 сторінок. 10 tonne hydraulic pump, ram & hose
Друкувати сторінку
ASSEMBLY
When assembling the Hydraulic Ram, Pump unit and attachments, unscrew
and retain the plastic end plugs on the connections for future use. Ensure the
hydraulic hose is tightly screwed to the connection.
1. Screw the Pump Handle into the socket in the pump unit.
2. Connect the pump to the ram using the hose.
3. Fit a Flat Base to the static end of the ram using a male connector.
Connect other attachments to the moving end of the ram as required.
Flat Base
Flat Base
• Various combinations of extension tubes and attachments can be
assembled as shown, according to the distance between the work
surface and the supporting frame.
For full insructions including the use of the various attachment available, refer
to the manual supplied with the CS10BRK/CS10SBRK Body Repair Kits.
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
Hydraulic Ram
Male Connector
Hose end cap remains attached
Extension Tube
4
Spreader
Ram Toe
Rubber
Head