CTEK 1018 Посібник користувача - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник користувача для Зарядний пристрій CTEK 1018. CTEK 1018 15 сторінок. Multi us 7002 battery charger
Друкувати сторінку
Chosen mode: "RECOND"
MULTI US 7002 has a Recond mode which is used to recondition a battery that has been
analysis phase is complete, the charger begins reconditioning the battery by providing a
constant current of 1.5A and a maximum voltage of 15.7V. After 0.5–4 hours, the battery
is completely reconditioned and the charger goes into pulse maintenance. The battery is
ready to be used, or store it with pulse maintenance active until you are ready to use the
battery. Recond is indicated by lamp E and lamp 6. Note that the recond phase begins
with normal charging and that the charger therefore will indicate the charging phases ac-
INDICATORS
3
2
1
0
MODE
A
B
C
D
NORMAL
SUPPLY
Indication Description
0
Error mode, the charger suspends the charging / voltage maintenance.
See further description below.
1
Start mode.
2
Bulk charging, maximum voltage.
3
Absorption charging, voltage limited to chosen voltage.
4
Pulse maintenance charging
5
6
Recond charging
A
STANDBY
B
C
D
E
4
5
SUPPLY
6
RECOND
E
RECOND
s.
US • 11