Directed Electronics VIPER 5901 Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Пульт дистанційного керування Directed Electronics VIPER 5901. Directed Electronics VIPER 5901 15 сторінок. Security and remote start

Друкувати сторінку

Note:

The Arm/Disarm chirps should be programmed ON for the

alarm to emit any additional chirps during disarm. Ask your authorized

dealer if you have any questions.

➢ Battery Replacement

Slide the door up to expose the battery beneath the holder. Remove the

expired battery. Place the new battery into the remote control. When

power is returned the remote control is ready for use.

➢ Multi-car control capability

You can operate the 2-way remote control system for two cars, with full

command capability for both vehicles.

While holding a command button and transmitting, the car icon at the

top of the remote control will blink in groups to indicate which Car is

being controlled.

•

Car 1: 1 blink

•

Car 2: 2 blinks

To change the Car to be operated:

Two Way Remote

Press/hold the

and the text reads Car 1 or Car 2. Pressing the

between the two. This will indicate which car the remote currently

operates.

One Way Remote

Press and hold the

indicating current vehicle (one blink = car 1. 2 blinks = car 2) to scroll

from one to the other press the

AUX

button for 3 seconds or until the remote beeps

AUX

button until the amber light blinks once or twice

AUX

button again.

AUX

button will scroll