CTEK 1045 Посібник - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник для Зарядний пристрій CTEK 1045. CTEK 1045 8 сторінок.
Друкувати сторінку
CHARGING PROGRAMS
DESULPHATION
SOFT START
1 1
2
15.8V
50A until
31.6V
12.6V
NORMAL
25.2V
15.8V
50A until
31.6V
12.6V
AGM
25.2V
15.8V
50A until
31.6V
12.6V
Ca/Ca
25.2V
BOOST
SUPPLY
Time limit:
8 hours
*) SUPPLY program is not time limited
**) For 12V only, max current is delivered for 30 seconds followed by a 90 second rest time.
The 30 second counter starts when current has exceeded 50A. 50A is delivered continuously.
STEP 1 DESULPHATION
Detects sulphated batteries. Pulsing current and voltage, removes sulfates from
the lead plates of the battery restoring the battery capacity.
STEP 2 SOFT START
Tests if the battery can accept charge. This step prevents charging a defect battery.
STEP 3 BULK
Charging with maximum current until approximately 80% battery capacity.
STEP 4 ABSORPTION
Charging with declining current to maximize up to 100% battery capacity.
STEP 5 ANALYSE
Tests if the battery can hold charge. Batteries that can not hold charge may need
to be replaced.
10 • EN
BULK
ABSORPTION
ANALYSE
3
4
5
Increasing voltage to
14.4V
Checks if voltage
14.4V
28.8V
drops to below
28.8V
Declining current
12V
50A
24V
Increasing voltage to
14.7V
Checks if voltage
14.7V
29.4V
drops to below
29.4V
Declining current
12V
50A
24V
Increasing voltage to
14.7V
Checks if voltage
29.4V
14.7V
drops to below
29.4V
Declining current
12V
50A
24V
20 hours
8 hours
3 minutes
STEP 6 RECOND
Choose the Ca/Ca program to add the recondition step to the charging program.
This step can also be selected separately by choosing the BOOST-program. During
the recondition step voltage increases to create controlled gassing in the battery.
Gasing mixes the battery acid and gives back energy to the battery.
STEP 7 FLOAT
This step maintains the battery voltage by providing a constant voltage charge. This
step can also be selected separately by choosing the SUPPLY-program and then it
is possible to select different voltage settings.
STEP 8 PULSE
Maintaining the battery at 95–100% capacity. The charger monitors the battery
voltage and gives a pulse when necessary to keep the battery fully charged.
RECOND
FLOAT
PULSE
6
7
8
13.6V
12.7–14.4V
27.2V
25.4–28.8V
Max 50A
50–2A
13.6V
12.7–14.4V
27.2V
25.4–28.8V
Max 50A
50–2A
Max 15.8V
13.6V
12.7–14.4V
Max 31.6V
27.2V
25.4–28.8V
1.5A
Max 50A
50–2A
Increasing voltage to
15.8V
31.6V
1.5A
Selectable timer,
Initially 8h. Max 24h.
Selectable
13.6; 14.0;
14.4; 14.8V
27.2; 28.0
28.8; 29.2V
70A**
2 hours or 6 hours
depending on
10 days*
Max 1h pulse
battery voltage at
charge start
SUPPORT
CTEK offers a professional customer support: www.ctek.com.
For latest user manual see www.ctek.com.
By e-mail: [email protected], by telephone: +46(0) 225 351 80,
by fax +46(0) 225 351 95.
CTEK PRODUCTS ARE PROTECTED BY
Patents
Designs
EP10156636.2 pending
RCD 509617
US12/780968 pending
US D575225
EP1618643
US D580853
US7541778
US D581356
EP1744432
US D571179
EP1483817 pending
RCD 321216
SE524203
RCD 000911839
US7005832B2
RCD 081418
EP1716626 pending
RCD 001119911-0001
SE526631
RCD 001119911-0002
US7638974B2
RCD 081244
EP09180286.8 pending
RCD 321198
US12/646405 pending
RCD 321197
EP1483818
ZL 200830120184.0
SE1483818
ZL 200830120183.6
US7629774B2
RCD 001505138-0001
EP09170640.8 pending
RCD 000835541-0001
US12/564360 pending
RCD 000835541-0002
SE528232
D596126
SE525604
D596125
RCD 001705138-0001
US D29/378528 pending
ZL 201030618223.7
US RE42303
US RE42230
2012–05–30
Trade marks
TMA 669987
CTM 844303
CTM 372715
CTM 3151800
TMA 823341
CTM 1025831
CTM 405811
CTM 830545751 pending
CTM 1935061 pending
V28573IP00
CTM 2010004118 pending
CTM 4-2010-500516
CTM 410713
CTM 2010/05152 pending
CTM1042686
CTM 766840 pending