Alemite 8595-C Посібник з обслуговування та встановлення - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з обслуговування та встановлення для Промислове обладнання Alemite 8595-C. Alemite 8595-C 10 сторінок. Fluid evacuation system
Також для Alemite 8595-C: Посібник з експлуатації (6 сторінок)
Друкувати сторінку
Installation and maintenance
WARNING
Do not exceed lowest pressure rating of
any component in system
Failure to comply may result in
serious injury or death
WARNING
Do not operate pump with broken,
missing or defective parts Replace
defective parts prior to operation
Failure to comply may result in
serious injury or death
WARNING
Do not operate with leakage in system
Disconnect air to motor
Failure to comply may results in
serious injury
Installation
Depending on type of fluid to be evacuated,
fluid evacuation system installation and use
must be in accordance with flammable and
combustible liquids code (NFPA 30) and
automotive and marine service station code
(NFPA 30A) and must comply with all local
state and federal codes
Also, the United States Government safety
standards have been adopted under the
Occupational Safety and Health Act These
standards should be consulted, particularly
the General Standards, Part 1910, and the
Construction Standard, Part 1926
Maintenance
DANGER
Do not operate or service machine prior
to ensuring it has been properly
grounded System must be grounded to
reduce risk of static electrical parking
Refer to local, state and federal electrical
codes for detailed grounding
instructions
Failure to comply will result in death
or serious personal injury
5
WARNING
• Make sure pump and equipment used
or located in pumping area are
grounded
• Do not use system if any static
sparking or electrical shock occurs
Stop evacuation immediately and do
not use system until problem is
corrected
• Do not alter or modify any part of this
equipment
• Do not attempt to repair or
disassemble equipment while system
is operating
• Make sure all connections are
securely tightened before using
equipment
• Check all equipment regularly and
repair or replace worn or damaged
parts immediately
• Never place your hand on or near
pump suction inlet
Failure to comply may result in
personal injury and/or damage to
equipment