CTEK MXS 5.0 CHECK Посібник - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник для Автомобільний зарядний пристрій CTEK MXS 5.0 CHECK. CTEK MXS 5.0 CHECK 2 сторінки. Combined battery charger warranty and battery&alternator check
Також для CTEK MXS 5.0 CHECK: Посібник (8 сторінок)
Друкувати сторінку
CTEK COMFORT CONNECT–eyelet M6
CTEK COMFORT CONNECT–clamp
CHARGING
2
MODE
RECOND
1
1. Connect the charger to the battery.
2. Connect the charger to the wall socket.
Power-on lamp lights
3. Press the MODE-button to select charging program.
Small sized batteries
Medium sized batteries
Charging in cold conditions and AGM batteries requir-
ing 14.7 V charging
Reconditioning of deeply discharged batteries
4. ... and ready.
CTEK's UNIQUE 8 STEP CHARGING
www.ctek.com
CTEK MXS 5.0 CHECK
MXS 5.0
12V/5A
3
1
• Unique 3 voltage check programs
• The 3 voltage check programs works both with and without
230V-supply
• Multi combination modes for selectable options for all programs.
• Fully automatic charging and maintenance in 8 steps
maximizes battery life and performance
• Numerous accessories simplifies using the same charger
for multiple batteries
• One charger for the car, motorcycle, lawn mower, snowmobile,
and tractor
• Water-resistant so that the solution could be taken to the problem
even if it rains or snows
• Patented maintenance charge for a unique combination
of maximized life and performance
• Recondition of deep discharged batteries
• Patented desulphation that extends the battery life
• No sparks, short-circuit proof and reverse-polarity protected
for untroubled usage
• Automatic detection of end-of-life batteries that eliminates surprises
CHECKING
1. Press the Mode-button for 2 seconds to select
CHECK VOLTAGE program
2. Choose a VOLTAGE CHECK PROGRAM:
BATTERY: checking the battery performance.
START POWER: checking the battery´s
performance when cranking.
ALTERNATOR: checking the alternator
or generator performance.
3. Check the result:
CHECK BATTERY
CHECK START POWER
CHECK ALTERNATOR
STEP 1 DESULPHATION
1
STEP 2 SOFT START
2
STEP 3 BULK
3
STEP 4 ABSORPTION, READY TO USE
4
STEP 5 ANALYSE
5
STEP 6 RECOND
6
STEP 7 FLOAT, FULLY CHARGED
7
STEP 8 PULSE, MAINTENANCE CHARGING
8
CTEK MXS 5.0
BAD
FAIR
—12.4V
12.4—12.65V
12.65V—
—9.6V
9.6—10.5V
—13.3V
13.3—14.0V
CHECK
5 A
OK
10.5V—
14.0V—