alphatronics AlphaVision XL Інструкція з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Клавіатура alphatronics AlphaVision XL. alphatronics AlphaVision XL 4 сторінки.

Друкувати сторінку

3 mounting holes for keypad

Figure 1 – AlphaVision XL / ML keypad front and back plate

From hardware revision 1.7 it is possible to adjust the brightness of the backlight (silicone keypad and LCD display). This also

applies for the volume of the buzzer.

Brightness = hold the

Buzzer volume =hold the

Dipswitchs

SW 1..3

RS-485 address settings of the keypad

SW 4

bridge the tamper contact

SW 5

not used

SW 6

not used

Specifications

Wieght

Dimensions

Power supply

Current drain nominal (backlight OFF)

Current drain nominal (backlight ON)

Current drain MAX

Temperature

EN50131 Compliance

The AlphaVision XL/ML keypad is tested en approved according to EN50131-3: 2009 by Telefication

Security grade 3, Environmental class 2.

and complies with

WEEE-declaration

This Alphatronics product is manufactured with the most modern technology and consists of high quality

components. Most of the components used can be recycled.

The symbol means that this product should be recycled separately and not put in the normal waste bin

together with normal household waste.

This product can be handed over to your local city council disposal point, shop or supplier .

Installation instruction AV-XL/ML instruction

button pressed and use the

Rev.1.2

2 extra mounting holes

for anti-tamper

protection.

This is only necessary

for Grade 3 compliant

installations

and

buttons to adjust the brightness.

and

buttons to adjust the buzzer volume.

ON = bridged

LCD

165mm x 125mm x 26mm (HxBxD)

15mA

90mA

100mA

15-07-14

LCD/PROX

271g

9-15-5VDC

65mA

140mA

150mA

0 – 40°C

(www.telefication.com)