Directed Video VC2050 Посібник користувача з встановлення - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник користувача з встановлення для ВІДЕОМАГНІТОФОН Directed Video VC2050. Directed Video VC2050 18 сторінок. Directed electronics video cassette recorder with tv tuner owners guide vc2050

Друкувати сторінку

Troubleshooting

Before calling for service, check the following:
PROBLEM
No Power.
Videocassette cannot be inserted.
No picture, distorted picture
playback.
No TV broadcast picture.
Streaks (noise) on a taped program.
Streaks (noise) or jitter with
the VCR in Still mode.
Streaks (noise) on a taped program.
The VCR motor continues to run
after STOP is pressed.
16
SOLUTION
Make sure the VCR is on and connected to an operating
power source; check the remote for "good" batteries.
Press EJECT to see if a cassette is already in the VCR.
Make sure the videocassette is window-side up, with the
arrow pointing toward the VCR.
I
Try another videocassette to see if it plays back
properly.
I
Press TRK up or down to adjust the picture.
I
Set INPUT MODE on TV to AUX IN, VIDEO or EXTERNAL.
I
Make sure the TV is working properly.
I
If the problem occurs on more than one tape, try
using a video head cleaner cassette.
I
Check all connections between VCR and TV.
I
Make sure TV is on.
I
Press TRK up or down to adjust the picture.
I
Check all connections.
I
View another videocassette to see if it plays back
properly.
I
If the problem occurs on more than one tape, try
using a video head cleaner cassette.
Press TRK up or down to adjust the picture.
I
Check if the VCR is in Still mode.
I
Check if the cassette has been rewound.
This is normal; the video heads run for five minutes even
even after a cassette has been stopped.
© 2001 Directed Electronics, Inc.