Clarke CBS-12WB Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Пила. Clarke CBS-12WB. Clarke CBS-12WB 14 сторінок. 12" wood cutting bandsaw

I. UNPACKING AND CHECKING CONTENTS

Unpack carton, check your machine, to see parts listed below:

A. Basic saw assembly

B. Owners Manual

C. Saw Table assembly

D. Bag Assembly

Containing the following parts:

1. Switch, Key

2. Nut, W ing 1/4-20

3. Screw, Truss Hd. 1/4-20 x 3/4

4. Washer 67 x «i16 x tf6

5. W rench, Hex. "L" 3 MM

6. W rench, Hex. "L" 5 MM

7. Washer 17/64 x 47/64 x 1/16

8. Indicator, Bevel

9. Screw, Pan Cross #10-24 x 3/8"

10. Insert, Table

11. Knob

Note: If you find any parts missing or damaged, contact the dealer for exchange

replacement.

-2-

M. TO KNOW YOUR BAND SAW

1. Tension adjusting knob . . . Tightening the knob (clockwise) will

blade. Loosening it (counter clockwise) will decrease the tension. (Tension lock knob must

be released).

2. Cover knobs . . . Secure cover to frame by tightening all three (3) cover knobs.

3. Blade Guides . . . Supports the blade and keeps it from twisting during operation. An

adjustment is necessary when blades are changed or replaced.

4. Tension lock knob . . . Holds position of the upper wheel which is set by the tension

adjusting knob.

5. Guide bar lock knob . . . The upper blade guide assembly should just clear the work-piece

while cutting. Always adjust the upper guide assembly and lock the guide bar by tightening

the blade guide lock knob before turning on the band saw.

6. Table lock knobs . . . Loosening knobs allows the table to be tilted and tightening knobs

locks the table in place.

7. Tilt (bevel) scale . . . Shows degree table is tilted for bevel cutting.

8. ON-OFF SW ITCH. The On-Off Switch has a locking feature. THIS FEATURE IS

INTENDED TO HELP P R E V E N T UNAUTHORIZED AND POSSIBLY HAZARDOUS

USE BY CHILDREN AND OTHERS.

;

increase the tension on the

-3-