Clarke WOODWORKER CBS250 Посібник з експлуатації та технічного обслуговування - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з експлуатації та технічного обслуговування для Пила. Clarke WOODWORKER CBS250. Clarke WOODWORKER CBS250 13 сторінок. 45 mm (10”) bandsaw & stand
Також для Clarke WOODWORKER CBS250: Інструкція з експлуатації та обслуговування (20 сторінок)
Друкувати сторінку
Parts List
Item
Part No
Description
IMPORTANT:
he use of parts other than CLARKE replacement parts may result in safety hazards,
T
decreased tool performance and may invalidate your warranty.
-18-
SAFETY PRECAUTIONS
Qty
As with all machinery, there are certain hazards involved with their operation
and use. Exercising respect and caution will considerably lessen the risk of
personal injury. However, if normal safety precautions are overlooked or
ignored, personal injury to the operator or damage to property, may result.
ALWAYS
Learn the machines applications, limitations and the specific potential
1.
hazards peculiar to it. Read and become familiar with the entire
operating manual.
ALWAYS
use a face or dust mask if operation is particularly dusty.
2.
ALWAYS
check for damage. Before using the machine, any
3.
damaged part, should be checked to ensure that it will operate
properly, and perform its intended function. Check for alignment of
moving parts, breakage of parts, mountings, and any other condition
that may affect the machines operation. Any damage should be properly
repaired or the part replaced. If in doubt,
local dealer.
ALWAYS disconnect the tool/machine from the power supply before servicing and
4.
when changing accessories.
wear safety goggles, manufactured to the latest European Safety Standards.
5. ALWAYS
Everyday eyeglasses do not have impact resistant lenses, they are not safety glasses.
6.
ALWAYS
keep work area clean. Cluttered areas and
benches invite accidents.
ALWAYS
ensure that adequate lighting is available. A
7.
minimum intensity of 300 lux should be provided. Ensure
that lighting is placed so that you will not be working in your
own shadow.
ALWAYS
8.
keep children away. All visitors should be kept a
safe distance from the work area, especially whilst operating the
machine.
maintain machine in top condition. Keep tools/machines
ALWAYS
9.
clean for the best and safest performance. Follow maintenance
instructions.
10.
ALWAYS
handle with extreme care do not carry the tool/machine
by its electric cable, or yank the cable to disconnect it from the
power supply .
ALWAYS
ensure the switch is off before plugging in to mains. Avoid accidental starting.
11.
ALWAYS
12.
concentrate on the job in hand, no matter how
trivial it may seem. Be aware that accidents are caused
by carelessness due to familiarity.
ALWAYS
13.
keep your proper footing and balance at all
times dont overreach. For best footing, wear rubber
soled footwear. keep floor clear of oil, scrap wood, etc.
WARNING:
DO NOT
use the machine. Consult your
-3-