Clarke DEVIL 350B 230V Інструкція з експлуатації та обслуговування - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та обслуговування для Обігрівач Clarke DEVIL 350B 230V. Clarke DEVIL 350B 230V 17 сторінок.
Друкувати сторінку
fused isolator switch. On no account must a 230V, 13 amp (BS1363) plug be
used.
NOTE: If a portable 110V transformer is used, make sure it has a rated
capacity sufficient to take the load of the heater.
If the heater is hard wired into the electrical system, all work must be carried
out in accordance with IEE regulations.
If in any doubt, consult a qualified electrician. DO NOT attempt any electrical
repairs yourself.
UNPACKING AND ASSEMBLY
Before assembling, please check contents against the following list and advise
your dealer immediately if any parts are missing.
• 1 x Heater
• 2 x Legs
• 1 x Handle
• 1 x Remote Controller (batteries not included)
• 1 x Set fixings (screwed into back of the heater)
CAUTION: TAKE CARE TO REMOVE ALL PACKAGING MATERIALS FROM
WITHIN THE FRONT OF THE HEATER. YOU WILL NEED TO RELEASE THE
SCREWS SECURING THE FRONT GRILLE IN ORDER TO DO THIS.
1. Remove the 4 lower screws from
the heater and use them to attach
the legs as shown.
2. Repeat with the two remaining
screws to fit the handle as shown.
3. DO NOT use the heater without
fitting the legs.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6