LEGO MINDSTORMS Education EV3 MicroPython Початок роботи - Сторінка 4
Переглянути онлайн або завантажити pdf Початок роботи для Навчальне обладнання LEGO MINDSTORMS Education EV3 MicroPython. LEGO MINDSTORMS Education EV3 MicroPython 17 сторінок.
Друкувати сторінку
CHAPTER
ONE
INSTALLATION
This section will guide you through the steps required to download and install the necessary software you
will need to start programming.
1.1 What do you need?
To get started, you will need:
• A Windows 10 or Mac OS computer
• Internet access and administrator access
This is required during the installation only. You will not need special access to write and run
programs after installation.
• A microSD card
You will need a card with a minimum capacity of 4GB and a maximum capacity of 32GB.
This type of microSD card is also known as microSDHC. A Performance Class A1 microSD card
is recommended.
• A microSD card slot or card reader in your computer
If your computer does not have a (micro) SD card slot, you can use an external USB (micro)
SD card reader.
• A mini-USB cable, like the one included with your EV3 set
The typical configuration of this equipment is summarised in Figure 1.1.
LEGO, the LEGO logo and MINDSTORMS are trademarks of the LEGO Group.
©2019 The LEGO Group.
2