Clarke Devil IRD20B Інструкція з експлуатації та технічного обслуговування - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та технічного обслуговування для Обігрівач Clarke Devil IRD20B. Clarke Devil IRD20B 17 сторінок. Infrared diesel heater
Друкувати сторінку
6. Take care not to spill diesel or paraffin onto the power cable as this could
damage the insulation.
7. Never move, replenish the fuel supply or handle the heater when it is hot, or
in use. Turn it off and wait for it to cool down first.
ELECTRICAL SAFETY
1. Electrical appliances must match the power outlet. Never modify the plug
in any way. Do not use adaptor plugs with earthed (grounded) appliances.
Correct plugs and outlets will reduce the risk of electric shock.
2. Do not abuse the electrical cable. Never use the cable for pulling or
unplugging the heater. Keep the cable away from sources of heat, oil,
sharp edges or moving parts. Damaged or tangled cables increase the risk
of electric shock.
3. Keep the mains cable well away from machines and ensure an adequate
electrical supply is close at hand so that the operation is not restricted by
the length of the cable.
4. Always disconnect from the mains supply before moving the heater or
performing any maintenance tasks.
5. Inspect the mains cable regularly for signs of damage. DO NOT use if it is
damaged and always keep it away from the source of heat.
6. If the power cable is damaged, it must be replaced by the manufacturer,
its service agent, or similarly qualified persons in order to avoid a hazard.
SERVICE & REPAIRS
1. Check the heater for damage before use. DO NOT use if the heater is
damaged. Any damage should be properly repaired or the part replaced.
If in doubt, DO NOT use the heater. Consult your local dealer.
2. When necessary, have your heater serviced or repaired by a qualified
person using identical replacement parts. This will ensure that the safety of
the heater is maintained.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6