CLAS HU 0185BL Посібник - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник для Сервісне обладнання CLAS HU 0185BL. CLAS HU 0185BL 12 сторінок. 25l waste oil drainer

HU 0185BL

25L WASTE OIL DRAINER

UNPACKING AND CHECKING

Packaging

Carefully remove the unit from its packaging and check that it has not been damaged in transit. Lay

out the contents of the unit and check that they correspond to the parts listed below.

Warning! Some of the packaging materials used may be harmful to children, so please do not leave

any of these materials within the reach of children. If the packaging is to be disposed of, please

ensure that it is disposed of correctly, in accordance with current regulations. The packaging contains

several parts and semi-assembled components that require final assembly. Arrange the contents and

mark the items in relation to those shown below.

USE

Connect compressed air (8 bar) to the vacuum pump

connector a.Once the gauge points to the rad zone on the

air pressure gauge b (approx. 2.5-3 minutes), disconnect

the unit from the pressurized air.The oil bleeder is now

depressurized and ready for use. While the vehicle's engine

is still warm, remove the dipstick and insert the oil probe

as far into the engine as possible. Connect suction hose c

to the probe. Once the oil has completely drained from the

engine, close the suction hose valve.

Draining the tank

Caution: Ensure that the ball in the oil sump is securely

locked. Connect a 0.5 bar air supply to air inlet 14 and open

drain hose valve 17. Once the oil has been transferred from

the tank to the waste container, close the drain hose valve:

Be sure to clean up any oil leaks immediately. Always wash

your hands after draining the oil.

Inspect oil traps before use. Ensure that the following items are checked before each use:

• Leaks: in the event of leaks, contact a qualified Clas équipements service agent for maintenance

and repair. Do not use the oil drainer if leaks are identified.

• Flexible hose; ensure that the hose is correctly connected before use.Do not store used oil in the

tank for long periods, as this will lead to corrosion of the oil drainer. Wipe the oil drain regularly with

a clean cloth or towel. Store the oil drain in a cool, dry place, out of direct sunlight.

Warning : Ensure that the operating temperature does not exceed 70°C during operation. If it does,

stop the oil drainer immediately and check for faults. If the operating temperature continues to

exceed 70°C after the oil drainer has been restarted, contact Clas. Always wear appropriate safety

clothing (PPE) when operating the oil drainer.